6.8SPC/CFE223

Discussion in 'Ammunition & Reloading' started by FortRock, Oct 28, 2014.

  1. FortRock

    FortRock
    Bend/Salem, OR
    Bronze Supporter Bronze Supporter

    Messages:
    494
    Likes Received:
    334
    Anybody have a load for the 6.8 with CFE223?
     
    Last edited: Oct 30, 2014
  2. Twodogs

    Twodogs
    portland Or
    Active Member

    Messages:
    669
    Likes Received:
    215
    NO AA-22000 R-10 and H-322 are the powders I run in the 6.8mm you can cross check the burn rates to see if it comes close.
     
  3. gary67

    gary67
    Bend
    Member

    Messages:
    50
    Likes Received:
    8
    Hey Bob if you want to load some 6.8 I have h332 or 2200 maybe do some kind of trade. Powder or 270wsm brass
     
  4. FortRock

    FortRock
    Bend/Salem, OR
    Bronze Supporter Bronze Supporter

    Messages:
    494
    Likes Received:
    334
    I have some excellent loads for H322 and have a good supply. I want to hold on to my 270wsm brass until my proposed sale of my Weather Warrior is complete. The brass is pretty expensive as is the ammo.

    I should have checked the burn rate on CFE223. It is obviously too slow-burning for 6.8spc. Probably why it's not used in any of the manuals.
     

Share This Page