44 Magnum Shell Extractor

Discussion in 'Maintenance & Gunsmithing' started by TINCANBANDIT, Oct 3, 2009.

  1. TINCANBANDIT

    TINCANBANDIT
    Federal Way
    Active Member

    Messages:
    83
    Likes Received:
    177
    Help.....I have a broken shell stuck in my Winchester M94 lever gun, does anyone out there own a broken shell extractor? I will gladly pay for the service.....
     
  2. BillM

    BillM
    Amity OR
    Bronze Supporter Bronze Supporter

    Messages:
    1,103
    Likes Received:
    577
    Try this:

    Insert cleaning rod from muzzle.
    Drop a nice sharp new oversize bronze cleaning brush into
    the open action. A 50 cal brush is probably the biggest you will
    find locally. 45 cal MIGHT do it, but it's iffy.
    Screw the rod onto the brush.
    Pull the brush into the broken case.
    Smack the end of the cleaning rod with your hand or a soft hammer.


    If it works, the brush bristles will lock up inside the broken case and
    drive it out of the chamber.
     
  3. TINCANBANDIT

    TINCANBANDIT
    Federal Way
    Active Member

    Messages:
    83
    Likes Received:
    177
    I ended up using this method:

    I found a tap that would thread into a .44 mag case without cutting through the brass, I carefully threaded it into the broken shell, then using a wood dowel, inserted from the muzzle end, I tapped it out.
     
    Sstrand and (deleted member) like this.

Share This Page