>40 s&w dies

Discussion in 'Ammunition & Reloading' started by Rascals, Nov 5, 2010.

  1. Rascals

    Rascals
    Portland Or
    Active Member

    Messages:
    384
    Likes Received:
    122
    I use a dillion 500 and most of my dies are dillion with some others for certain caliburs but Im going to start laoding for a 40 s&w and I cant sea find them local. Are there any local dealers for dillion? Is there other dies that you love to use in a dillion for the 40 s&w that you could sugest and where to get?
     
  2. PhysicsGuy

    PhysicsGuy
    Corvallis, OR
    Resident Science Nut

    Messages:
    4,134
    Likes Received:
    158
  3. noylj

    noylj
    high desert
    Active Member

    Messages:
    154
    Likes Received:
    51
    I prefer the Hornady sizing die as it resizes almost down to the extractor groove. Dillon powder funnel for case expansion and charging. Lyman "M"-die if you want a separate expansion die. If using jacketed/plated bullets, I prefer the Hornady bullet seating die. Dillon for seating messy cast bullets, though the Hornady inserts can be removed without removing the die body from the toolhead. Dillon taper crimp is as good as any.
     
  4. AMProducts

    AMProducts
    Maple Valley, WA
    Jerk, Ammo Manufacturer Silver Supporter

    Messages:
    2,828
    Likes Received:
    1,908
    RCBS dies will fit... those are my preferred dies, I use them on the 550, 650 and 1050.
     

Share This Page