- Messages
- 71
- Reactions
- 4
bought the subs new last year, and have hardly pushed them. The amp I got used and has some cosmetic ware but operates just fine. I have them wired down to a 1ohm load, so the amp is pushing a full 1000 watts.
Everything is installed in my car, so you can listen before you buy.
not looking to separate the two.
Private message with trades. Looking for handguns.
400 obo -
Amplifier Specs: Rockford Fosgate Punch P1000-1bd MSRP 599.99
mono subwoofer amplifier
250 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
1,000 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
variable low-pass filter filter (35-250 Hz, 12 dB/octave)
selectable subsonic filter (28Hz, 12 dB/octave)
variable bass boost (0-18 dB at 45 Hz)
optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages (uses TO-247 MOSFETs)
preamp-level inputs
preamp outputs
4-gauge power and ground leads and an 140-amp fuse recommended -- wiring and hardware not included with amplifier
no onboard fuses -- when installing multiple amps in a system, an additional 140-amp in-line fuse between the distribution block and the amplifier is recommended
14-1/4"W x 2-1/4"H x 8-1/2"D
Subwoofers Spec: Kicker Comp-D Series Dual 4-Ohm Subwoofer 40CWD154 MSRP 149.95 ea
600 Watt RMS
1200 Watt MAX
The world's best subwoofer value
Renowned KICKER power and durability
Enables wiring flexibility in series, parallel or stereo for proper impedance matching with any KICKER CX-Series Amplifier
Excellent for sealed or vented enclosure, or freeair applications
Quad Ventingâ"¢ for efficient cooling and long life
Rip-resistant, large-diameter spider with high-strength Spiraleadâ"¢ technology
1/4"-inch heavy-duty spade connections
Impedance: 4 Ohm DVC
Sensitivity: 90dB
Frequency Response: 25-500 Hz
Mounting Dept: 7"
Mounting Diameter: 13-3/4"
Min Sealed Box Vol (cu. ft, L): 2.25, 63.7
Max Sealed Box Vol (cu. ft, L): 5.0, 141.6
Min Vented Box Vol (cu. ft, L): 3.0, 85
Max Vented Box Vol (cu. ft, L): 4.0, 113.3
Part Number: 40CWD154
Everything is installed in my car, so you can listen before you buy.
not looking to separate the two.
Private message with trades. Looking for handguns.
400 obo -
Amplifier Specs: Rockford Fosgate Punch P1000-1bd MSRP 599.99
mono subwoofer amplifier
250 watts RMS x 1 at 4 ohms (500 watts RMS x 1 at 2 ohms)
1,000 watts RMS x 1 at 1 ohm
CEA-2006 compliant
Dynamic Thermal Management cooling system
variable low-pass filter filter (35-250 Hz, 12 dB/octave)
selectable subsonic filter (28Hz, 12 dB/octave)
variable bass boost (0-18 dB at 45 Hz)
optional wired remote bass boost
Class-BD amplifier design
MOSFET power and output stages (uses TO-247 MOSFETs)
preamp-level inputs
preamp outputs
4-gauge power and ground leads and an 140-amp fuse recommended -- wiring and hardware not included with amplifier
no onboard fuses -- when installing multiple amps in a system, an additional 140-amp in-line fuse between the distribution block and the amplifier is recommended
14-1/4"W x 2-1/4"H x 8-1/2"D
Subwoofers Spec: Kicker Comp-D Series Dual 4-Ohm Subwoofer 40CWD154 MSRP 149.95 ea
600 Watt RMS
1200 Watt MAX
The world's best subwoofer value
Renowned KICKER power and durability
Enables wiring flexibility in series, parallel or stereo for proper impedance matching with any KICKER CX-Series Amplifier
Excellent for sealed or vented enclosure, or freeair applications
Quad Ventingâ"¢ for efficient cooling and long life
Rip-resistant, large-diameter spider with high-strength Spiraleadâ"¢ technology
1/4"-inch heavy-duty spade connections
Impedance: 4 Ohm DVC
Sensitivity: 90dB
Frequency Response: 25-500 Hz
Mounting Dept: 7"
Mounting Diameter: 13-3/4"
Min Sealed Box Vol (cu. ft, L): 2.25, 63.7
Max Sealed Box Vol (cu. ft, L): 5.0, 141.6
Min Vented Box Vol (cu. ft, L): 3.0, 85
Max Vented Box Vol (cu. ft, L): 4.0, 113.3
Part Number: 40CWD154
Last Edited:
