- Messages
- 17
- Reactions
- 1
I have been trying to hold off doing this as long as possible. Unfortunately, I have no choice but to sell two rifles I consider to be the best I have ever owned.
Divorce is forcing sale, my loss is your gain.
#1 - Lewis Machine & Tool (LMT) Defender 2000 5.56 approx 350 rounds fired - Over $5500 invested - $4000 firm
LMT defender 2000 lower
LMT 2 stage trigger
Hogue pistol grip
Magpul BAD lever
LMT SOPMOD Stock
QD one point sling mount end plate
3.9 oz buffer
BAD ambi safety
KNS anti rotational pins
LMT Monolithic Rifle System (Rifle length) upper
LMT 14.5" Chrome lined 5.56 barrel 1:7 with pinned and welded Surefire MB556k
LMT Enhanced Auto bolt carrier group
BCM Gunfighter Mod 4 Medium charging handle
PRI folding sights
Aimpoint M4s 2MOA red dot on Bobro QD mount with flip up covers and glare filter
Tango Down short vertical grip
All furniture is black unless noted otherwise
Magpul OD ladder style rail guards
Includes the following misc items....
LMT torque wrench and bit
3 steel 3rd mags
Pelican hard case - with new foam for you to configure how you see fit.
This is an older picture, I have since configured it to what is listed above but this will give you an idea....
#2 - Mega billet lower (non ambi) and Monolithic (mid length) upper - set up as dedicated .22. less than 500 rounds fired - $2500 firm
Mega forged lower
LMT 2 stage trigger
Hogue pistol grip (FDE)
Magpul BAD lever
Magpul CTR Stock (milspec) (FDE)
QD one point sling mount end plate (FDE)
BAD ambi safety (FDE)
KNS anti rotational pins (FDE)
Mega Monolithic Mid length upper
Beyer 16.5" fluted .22 Barrel with Beyer comp (see photo) Beyer Barrels - Home
CMMG conversion kit hand fit to barrel by Beyer.
CMMG small slot charging handle
Magpul folding sights (FDE)
Aimpoint PRO 2MOA red dot on (3x magnifier in photos not included)
Tango Down short vertical grip (FDE)
Magpul FDE ladder style rail guards
Includes 4 25 round CMMG mags (2 black 2 FDE)
**WARNING** This rifle is really only likes CCI minimags, subsonic rounds don't have the umph to cycle the nearly new conversion kit.
It will include the barrel nut wrench from Mega
All you need is a bolt carrier group, barrel, charging handle and a mag to make this a dream 5.56 as well.
I am willing to do a package deal for both rifles. If one person does by both rifles I will include a 5.11 tactical two rifle range bag.
I am sure I may have forgotten something. If you have questions please do not hesitate to ask.
For Sale only, CASH only, not interested in trades at this time. Lowball offers will be ignored.
Bill of sale for my records, as well as viewing of DL and CPL or other proof of right to own.
I live in the Greenlake Area and work in South Lake Union. I am willing to meet anywhere between Lynnwood (Alderwood area) and Tukwila (Southcenter area).
Divorce is forcing sale, my loss is your gain.
#1 - Lewis Machine & Tool (LMT) Defender 2000 5.56 approx 350 rounds fired - Over $5500 invested - $4000 firm
LMT defender 2000 lower
LMT 2 stage trigger
Hogue pistol grip
Magpul BAD lever
LMT SOPMOD Stock
QD one point sling mount end plate
3.9 oz buffer
BAD ambi safety
KNS anti rotational pins
LMT Monolithic Rifle System (Rifle length) upper
LMT 14.5" Chrome lined 5.56 barrel 1:7 with pinned and welded Surefire MB556k
LMT Enhanced Auto bolt carrier group
BCM Gunfighter Mod 4 Medium charging handle
PRI folding sights
Aimpoint M4s 2MOA red dot on Bobro QD mount with flip up covers and glare filter
Tango Down short vertical grip
All furniture is black unless noted otherwise
Magpul OD ladder style rail guards
Includes the following misc items....
LMT torque wrench and bit
3 steel 3rd mags
Pelican hard case - with new foam for you to configure how you see fit.
This is an older picture, I have since configured it to what is listed above but this will give you an idea....
#2 - Mega billet lower (non ambi) and Monolithic (mid length) upper - set up as dedicated .22. less than 500 rounds fired - $2500 firm
Mega forged lower
LMT 2 stage trigger
Hogue pistol grip (FDE)
Magpul BAD lever
Magpul CTR Stock (milspec) (FDE)
QD one point sling mount end plate (FDE)
BAD ambi safety (FDE)
KNS anti rotational pins (FDE)
Mega Monolithic Mid length upper
Beyer 16.5" fluted .22 Barrel with Beyer comp (see photo) Beyer Barrels - Home
CMMG conversion kit hand fit to barrel by Beyer.
CMMG small slot charging handle
Magpul folding sights (FDE)
Aimpoint PRO 2MOA red dot on (3x magnifier in photos not included)
Tango Down short vertical grip (FDE)
Magpul FDE ladder style rail guards
Includes 4 25 round CMMG mags (2 black 2 FDE)
**WARNING** This rifle is really only likes CCI minimags, subsonic rounds don't have the umph to cycle the nearly new conversion kit.
It will include the barrel nut wrench from Mega
All you need is a bolt carrier group, barrel, charging handle and a mag to make this a dream 5.56 as well.
I am willing to do a package deal for both rifles. If one person does by both rifles I will include a 5.11 tactical two rifle range bag.
I am sure I may have forgotten something. If you have questions please do not hesitate to ask.
For Sale only, CASH only, not interested in trades at this time. Lowball offers will be ignored.
Bill of sale for my records, as well as viewing of DL and CPL or other proof of right to own.
I live in the Greenlake Area and work in South Lake Union. I am willing to meet anywhere between Lynnwood (Alderwood area) and Tukwila (Southcenter area).
