- Messages
- 332
- Reactions
- 76
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
rimfirecentral
Do your own trigger I did mine and it's awesome.
Trigger Group Modifications - RimfireCentral.com Forums (actual thread)
10/22 Tips & Tricks - RimfireCentral.com Forums (parent forum that has 10/22 diy's.)
I have polished the internals, did the sear (blah blah blah). The only thing I have not done is the JB Weld trick that's on the page. I don't have anything to coat my trigger parts with so the jb won't stick or I would have done it already.
I took my Dremel stylus and a light buffing pad and about an hours worth of my day and learned how to do it. You can do it with sand paper and a small file if you don't have a dremel.
There is one DIY that I can't seem to locate, it deals with the hammer and filing a bit of the lip off so you get a very clean break on the trigger.
+1 But "DO NOT" use a dermal, at least not on your first one. Do it by hand & take your time.
These are also helpful links.
How the Trigger, Sear and Disconnector work. - RimfireCentral.com Forums
Stoning the Hammer - RimfireCentral.com Forums
While your in there I highly recommend doing the auto bolt release mod, Good luck.
Auto Bolt Release Picture - RimfireCentral.com Forums