10 ga. Reloader Ponsness Warren with hulls and wads

[Quack Attack]

Ad Type

1. For Sale

Price

$600

Manufacturer

Other / Not Listed

Caliber

10 Gauge

City

Monmouth

State

Oregon

Zip Code

97361

Used PW 375 Magnomatic reloader.
It hasn't been used in about 10 years but it's cleaned up and runs smooth as silk.
If you've never loaded on a PW machine you are missing out, and IMHO it's the only brand that is built that properly loads the 10ga.

It is pretty well stock from the factory except:
Home made powder measure adapter to mount a powder measure rather than using bushings. This is really important with Alliant Steel powder as it's so bulky.
Custom (from the factory) full length sizing die for Winchester 10ga hulls which are about .1" shorter than normal.
The 10ga version of the 375 series comes with a shell taper die which is installed.
Includes a couple shot bushings. I have a bunch so I'll just make sure you get the ones you will need.
Both shot and powder tubes are included like in the first picture, powder measure is not.
I will include 2 Ballistic Products loading manuals and copies of lots of other loading data.
In the factory original box.
Price alone $500

Also I have 741 Hulls, mostly 1-2 times fired
18 Fiocchi, 117 Winchester, 313 Remington, 293 Federal.
Used hulls (if you can find them) are running about $30 per hundred, so $200 is fair.

Lots of wads too, mostly steel:
Ballistic Products; BPD10 approx 200, BPD10TUFF approx 250, Multimetal 200.
Reloading Specialties approx 25.
NTC approx 20.
Remington SP10 full bag (250).
All wads for $100

I'll sell everything together for $600

Thanks

Read More

 

[Floundersniper]

Used PW 375 Magnomatic reloader.
It hasn't been used in about 10 years but it's cleaned up and runs smooth as silk.
If you've never loaded on a PW machine you are missing out, and IMHO it's the only brand that is built that properly loads the 10ga.

It is pretty well stock from the factory except:
Home made powder measure adapter to mount a powder measure rather than using bushings. This is really important with Alliant Steel powder as it's so bulky.
Custom (from the factory) full length sizing die for Winchester 10ga hulls which are about .1" shorter than normal.
The 10ga version of the 375 series comes with a shell taper die which is installed.
Includes a couple shot bushings. I have a bunch so I'll just make sure you get the ones you will need.
Both shot and powder tubes are included like in the first picture, powder measure is not.
I will include 2 Ballistic Products loading manuals and copies of lots of other loading data.
In the factory original box.
Price alone $500

Also I have 741 Hulls, mostly 1-2 times fired
18 Fiocchi, 117 Winchester, 313 Remington, 293 Federal.
Used hulls (if you can find them) are running about $30 per hundred, so $200 is fair.

Lots of wads too, mostly steel:
Ballistic Products; BPD10 approx 200, BPD10TUFF approx 250, Multimetal 200.
Reloading Specialties approx 25.
NTC approx 20.
Remington SP10 full bag (250).
All wads for $100

I'll sell everything together for $600

Thanks

View attachment 848219 View attachment 848220 View attachment 848221 View attachment 848222 View attachment 848225

 

[Quack Attack]

Yes, still for sale.

 

[Newlyminted]

PM sent