Gold Supporter
- Messages
- 968
- Reactions
- 1,432
- Ad Type
- For Sale
- For Trade
- Price
- $595
- Manufacturer
- Other / Not Listed
- City
- PORTLAND
- State
- Oregon
- Zip Code
- 97218
Built this baby from all brand new parts just two weeks ago. Decided to switch to 300 blackout and use a different setup. All less than 2 weeks old. All purchased locally.
TNW (from Vernonia) Billet Upper
Ballistic Advantage Hanson Barrel 10.3" 5.56 w/LoPro Gas system, pinned/dimpled.
Midwest industries combat handrail 9.5"
Milspec Charging handle and BCG
Railscales Karve-P handstop
Strike Industries Venom Flash Hider
Timber Creek Billet dust cover
90 rds/3 mags worth of ammo included if you pay my asking price
Total this build was about $805
Id like to get $595 cash or a $650 trade value.
Looking for 300 blackout ammo (supersonic) will trade up to 1.25/rd
Ar15 Upper receiver, a decent one. Black only.
18" 223 wylde barrel
12.5" 223 wylde barrel
Gen 3 or 4 Glock 17
Holosun 507k
3x magnifier flip to side
Olight odin weapon light
Microtech OTFs
Tactical 12g pump or semi
Potentially 5.56 or 9mm, however im only willing to do up to half the value and im only willing to trade up to 60c/rd
Only thing to note here is that I had to dremel down a portion of the Handguard where it contacts the Upper, (pictured) to get it to fit. It isn't really noticeable unless you really look hard. Apparently this is pretty common with billet sets since the tolerances are so tight.
Fired 60rds out of it to function check and it was AMAZING. super smooth and fast.
TNW (from Vernonia) Billet Upper
Ballistic Advantage Hanson Barrel 10.3" 5.56 w/LoPro Gas system, pinned/dimpled.
Midwest industries combat handrail 9.5"
Milspec Charging handle and BCG
Railscales Karve-P handstop
Strike Industries Venom Flash Hider
Timber Creek Billet dust cover
90 rds/3 mags worth of ammo included if you pay my asking price
Total this build was about $805
Id like to get $595 cash or a $650 trade value.
Looking for 300 blackout ammo (supersonic) will trade up to 1.25/rd
Ar15 Upper receiver, a decent one. Black only.
18" 223 wylde barrel
12.5" 223 wylde barrel
Gen 3 or 4 Glock 17
Holosun 507k
3x magnifier flip to side
Olight odin weapon light
Microtech OTFs
Tactical 12g pump or semi
Potentially 5.56 or 9mm, however im only willing to do up to half the value and im only willing to trade up to 60c/rd
Only thing to note here is that I had to dremel down a portion of the Handguard where it contacts the Upper, (pictured) to get it to fit. It isn't really noticeable unless you really look hard. Apparently this is pretty common with billet sets since the tolerances are so tight.
Fired 60rds out of it to function check and it was AMAZING. super smooth and fast.
- I agree to the classified rules and terms of service
Last Edited: