Join the #1 community for gun owners of the Northwest
We believe the 2nd Amendment is best defended through grass-roots organization, education, and advocacy centered around individual gun owners. It is our mission to encourage, organize, and support these efforts throughout Oregon, Washington, Idaho, Montana, and Wyoming.
Discuss firearms and all aspects of firearm ownership
Join others in organizing against anti-gun legislation
Buy, sell, and trade in our classified section
Find nearby gun shops, ranges, training, and other resources
Discover free outdoor shooting areas
Stay up to date on firearm-related events
Share photos and video with other members
...and much more!
A single-board computer (SBC) is a complete computer built on a single circuit board, with microprocessor(s), memory, input/output (I/O) and other features required of a functional computer. Single-board computers are commonly made as demonstration or development systems, for educational systems, or for use as embedded computer controllers. Many types of home computers or portable computers integrate all their functions onto a single printed circuit board.
Unlike a desktop personal computer, single board computers often do not rely on expansion slots for peripheral functions or expansion. Single board computers have been built using a wide range of microprocessors. Simple designs, such as those built by computer hobbyists, often use static RAM and low-cost 8- or 16-bit processors. Other types, such as blade servers, would perform similar to a server computer, only in a more compact format.
A computer-on-module is a type of single-board computer made to plug into a carrier board, baseboard, or backplane for system expansion.
Only 500 rounds through it. Bought it when I was living with my Mother-in-Law, we wanted an easy to rack option for home defense when she was watching my boys. Now that we’ve moved out I’ve moved on.
Shoots great, it really is a fun gun to shoot.
3 magazines, one with pinky...
Regretfully selling this one. Bought this sweet P220 to replace my P320 45 and it turns out that after shooting both I just like my P320 more, even though this one is a lot cooler ;). It is Sig's "Carry" size, which doesn't seem to be too common in the 220s. 3.9" barrel, DA/SA, night sights...
Glock 48 in like new condition with lots of goodies that go with it.
I’ve owned it for about 5 months and put 550 rounds through it. I didn’t have a single malfunction and 100 of those rounds were Speer gold dot hollow points. This gun is vetted and ready to carry.
I don't have any single stack mags (or guns) anymore, so this is for sale.
Opening is 1/2 " thick, X 1 1/4 " wide, X 2 1/2 " tall. Very good to excellent condition. $25.00 FTF in Gresham, East Portland area.
Beautiful single stack 9mm handgun with less than 150 rounds through it. Very smooth and in great condition. Comes with one mag. This is one of the first autoloading handguns that become popular among police agencies. This is a great collector piece and a very cool historic firearm.
Stainless steel slide + Night Sights!
Barely used (perfect condition), only 50 rounds through it at the range. Meticulously lubed / cleaned before & after use. Never carried in a holster.
Includes the two original magazines (7 round, 9 round) + an extra 7 round magazine with the flush base...
Glock 42, excellent condition. Never fired. Purchased early 2019.
All original factory accessories (box, lock, manual, cleaning supplies, warranty card)
20-round box of .380 Federal HSTs
50-round box of Blazer .380 ball ammo
Willing to transfer anywhere in...
Well I was only able to get to the range a few times since I bought this, but Ive got more important bills that need to be paid now... It comes with a springfield soft case, 2 extended 9rd magazines and two 8rd magazines (one of the 2 has a finger extension.)
$260 (buyer pays transfer fee)
Glock 43 with ghost trigger connector, comes with three 7 round mags (Pierce +1 baseplates) and one 6 round flush fit mag. Grip stickers are 3M DiNoc and will peel off clean.
I can meet at the FFL of your choice anywhere between Eugene and Portland.
Unfired Walther CCP M2. Just got it back from the factory, sent in my first generation for servicing, and they just sent me a new later model instead.
Between needing to send it in and now, I've bought a couple other small handguns, so I don't need it.
The M2 updates a few things, including...
Anyone try one out yet? It was featured in this month’s American Rifleman magazine and had pretty good reviews coming out of Gunsite Academy testing. I’ve watched quite a few videos on it and people seem to like it, but I’m wanting to find out what the masses have to say and if it’s having any...
Looking for a little help in the endless struggle that is the holster search. (Like a lot of us...I have returned / sold / given away a lot to slim down the pile). I have a few holsters but have yet to buy an AIWB + spare mag rig from these three; highly praised manufacturers in the poll. If you...
I'm looking for fellow citizens holding a CHL within the city limits of the Port of Portland. Particularly interested in those of you in the metro area like myself. Any and all conversation is greatly appreciated in addition to your vote! Thank you.
For sale is my really nice Beretta 85F single stack 380. I took this in a trade from another member but have decided I like my 84FS double stack version better. So somebody else gets to benefit.
I put 100 rounds through it at Safefire last week just to check it out and it functioned flawlessly...