Gold Supporter
- Messages
- 216
- Reactions
- 65
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Ditto....rebuild it yourself. I have 3 Marauders, 2 M-Rod's and a P-rod. They are very user friendly. Like Dave said, degas it first and have fun! ShawnWhy not do it yourself, they're easy rifles to work on, and seal kits are cheap. Plus PCP's are a piece of cake compared to a springer. And the Marauder makes it even easier, the hardest part is depressurizing the air tube, and they come with a tool just for that purpose. If you don't have one, PM me your address, I'm pretty sure I have a spare on hand. Probably have a full seal kit, too. Later.
Dave
oh yeah....I put regulator in both M-Rods and replaced the gauge on the P-rod along with a hammer-bounce thingy (tech term). Be sure and get a tube of silicone lube and lube all your o-rings before re-installing. Don't overtighten nuttin!! finger tight and a little. hope this helps ShawnDitto....rebuild it yourself. I have 3 Marauders, 2 M-Rod's and a P-rod. They are very user friendly. Like Dave said, degas it first and have fun! Shawn
go online and check out a couple of video on "Marauder Rebuild" or of the like and you'll get plenty of help. It worked for me, and I'm sure it'll work for you too. You Can Do It!! shawnThank you for all the replies I guess I will have to try and do it myself hopefully it'll work