Results 1 to 9 of 9

Thread: Glock 22 Clipdraw

  1. #1
    Member
    Join Date
    Dec 2011
    Location
    Salem
    Posts
    47

    Default Glock 22 Clipdraw

    Anyone used a Clipdraw on a Glock 22 for concealed carry? Experiences?

  2. #2
    Senior Member
    Join Date
    Sep 2011
    Location
    medford
    Posts
    183

    Default

    Just like with every other 'holster' like this I just don't feel comfortable with the trigger exposed. Especially with no manual safety. I know its a longshot, but its still possible.

  3. #3
    All around great guy! oasis618's Avatar
    Join Date
    Jan 2010
    Location
    Tacoma, Wa
    Posts
    952

    Default

    I've never used a Clipdraw but it seems like if you want to go as cheaply as possible that you'd be better off with a $10 Uncle Mike's nylon IWB holster, which actually probably costs less than the Clipdraw.

  4. #4
    Junior Member
    Join Date
    Jun 2011
    Location
    North End Tacoma
    Posts
    26

    Default

    I bought a clipdraw for my G17. Didn't care for it. It didn't hold the gun in place well enough and the idea of an exposed trigger doesn't sit well with me.
    If you're still interested I'll sell you mine, haha.

  5. #5
    Senior Member
    Join Date
    May 2011
    Location
    Grants Pass, OR
    Posts
    457

    Default

    I have no experience with the Clipdraw. In fact I looked it up to see what it was. **** PLEASE DO NOT USE THIS PRODUCT AND STICK YOUR GUN IN YOUR WAIST BAND ****.
    I also found the Saf-T-Blok on the same website that blocks the trigger on Glocks. If you were DEAD SET on using the Clipdraw then the Saf-T-Blok would be a must to use too. The Clipdraw is $25.95 and the Saf-T-Blok is $19.95 from the website. For $40 you can get a concealed carry holster from Paul at PJ Holster LLC | Simple, Practical, Affordable Holsters.
    You would NOT be able to use the Clipdraw for shooting competitions like Speed Steel, IDPA and IPSC. I also believe NO reputable training facility would allow you to use it either.
    Good luck and be safe,
    Mike

  6. #6
    Senior Member
    Join Date
    Dec 2008
    Location
    Salem, Oregon, United States
    Posts
    423

    Default

    Not to endorse the system by any means, but I do believe the Clipdraw is intended to be used with pistols without a round chambered.

  7. #7
    Senior Member
    Join Date
    Sep 2009
    Location
    Oregon
    Posts
    592

    Default

    Not only is it dangerous to have the trigger exposed but the glock 22 is a fairly big and heavy gun to be supported by a little steel clip.
    but I do believe the Clipdraw is intended to be used with pistols without a round chambered.
    +1 Even says that on their website.
    It's basically mexican carry with a little tab to keep it from sliding down the leg of your pants.

  8. #8
    Senior Member
    Join Date
    Sep 2009
    Location
    Newberg
    Posts
    485

    Default

    If you are carrying a Glock for self defense, then there needs to be a round in the chamber. If you are carrying a Glock for self defense with a round in the chamber, then it needs to be in a holster that completely covers the trigger guard. Otherwise, you will either wind up (a) dead or (b) with a divot blown into your butt cheek from a negligent discharge or (c) both.

  9. #9
    CJM
    CJM is offline
    Member
    Join Date
    Dec 2011
    Location
    Skagit County WA
    Posts
    31

    Default

    If you are carrying a Glock for self defense, then there needs to be a round in the chamber. If you are carrying a Glock for self defense with a round in the chamber, then it needs to be in a holster that completely covers the trigger guard.
    Yep, just a month or two ago a guy died from a self inflicte gsw to the leg in front of his wife and kids in their minivan because he opted to not use a holster for his Glock.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •