Thread: Are Colt Python's really worth the money?

Originally Posted by Chipperxd

I'm sure it is a top quality wheelgun but what makes them worth the extra cash over a SW or Ruger .357 that can be had for few hundred less?

The same thing that makes a SW or a Ruger worth a few hundred more than a comparable Taurus.

They will all get the job done... so to some people, they're not worth the extra money.

On the other hand, the build quality and craftsmanship is better, so is the trigger... So to others, it's well worth the extra money.

I love my s&w revolvers... my rugers are workhorses... but my python is my favorite by far. It's not a safe queen either, It gets shot whenever possible.

ive never felt any other wheel gun function and feel as smooth as a colt python period.they are hand fitted and very good quality.i think the collectability and reputation is the only thing driving the price.if i found one at around 1000 i'd buy it in a heart beat.you are talking about the cadillac of revolvers, not a 350 dollar taurus.now for you taurus lovers they are fine weapons but you will never see a taurus revolver come close to a python.its like comparing apples and oranges. "i can buy this one for half as much and it works fine" that may be true but the quality and wheel lock up wont even be close.

Hehehe.
Just pull the hammer back and feel the action.
smoooooooth

You can almost hear the Taurus action grinding.

Originally Posted by usmc

ive never felt any other wheel gun function and feel as smooth as a colt python period.they are hand fitted and very good quality.i think the collectability and reputation is the only thing driving the price.if i found one at around 1000 i'd buy it in a heart beat.you are talking about the cadillac of revolvers, not a 350 dollar taurus.now for you taurus lovers they are fine weapons but you will never see a taurus revolver come close to a python.its like comparing apples and oranges. "i can buy this one for half as much and it works fine" that may be true but the quality and wheel lock up wont even be close.

Originally Posted by gehrheart

I haven't owned the the python....

But I sure as heck kick myself daily for allowing myself to sell off my anaconda I had years ago.

Oh, I can feel that pain!!

Best for zombies

Originally Posted by sweetbeard

Best for zombies

Well,not so sure about that.
I mean a movie Python can probably only shoot maybe 14-15 zombies without a reload,and everyone knows a good glock can shoot at least 100+ before you can't find the second mag.

I have shot a Python quite a bit. Yes it shoots well but I can do better groups with my S&W 686. The smith seems to fit my hand better and the sights line up better. Even the owner of the Python could shoot the Smith better. Yes I think the Python is worth the money but as a shooter I will take a Smith.

I've always wanted one. I had a chance to buy a while back from a coworker. It was blued with the 6" barrel. He wanted $325 for it. I didn't haggle on that one. It turns out it was 2nd year of production. Oh yeah, it's a keeper.

They are the only revolver I have seen that are built like a Swiss watch!

Built like a swiss watch. True. Smooth but delicate. While they are working, there is no arguing, even by a card carrying S&W fan, that they are the smoothest revolver action made. However, if the revolver ever becomes out of timing, which will happen to most any revolver, especially with a steady diet of full house loads (which some of us are masochistic enough to do to ourselves), it damn near needs a swiss watch maker to fix it. The timing of the gun is controlled by a very small pyramid inside the revolver. It is probably a little more than an 1/8th of an inch across. There are six individual surfaces that need to be hand fit. Kind of like chasing your tail. Fit one, then the next. Check timing after each surface is fit. After all six are fit, check if it doesn't work, start at #1 again. The only time I did it, it took several work days (although to be honest, it was on a police positive, not a Python). It is something I will never do again.

As a collectible revolver, there are few finer choices. It is a very well built gun, with incredible attention paid to detail. The nickle plated are gorgeous, and the bluing is so good that the chemical recipe is (at least last I heard) a trade secret for Colt. But as an everyday shooter, I would argue that either a GP100 or a 686 (pre-lock, pre-mim) would be better, tougher choices. I don't know about anyone else, but any of the three would be more that welcome in my collection, albeit for different uses...

Can you imagine being told by a police officer who shows up right after you have to use your carry gun to "drop your gun and kick it over here" I would end up with 15 bullet holes in me trying to explain why I don't want to drop my $1000.00 Colt on the ground/pavement/sidewalk etc.

Originally Posted by Mark W.

Can you imagine being told by a police officer who shows up right after you have to use your carry gun to "drop your gun and kick it over here" I would end up with 15 bullet holes in me trying to explain why I don't want to drop my $1000.00 Colt on the ground/pavement/sidewalk etc.

Ha ha
I would be using my finger tips trying to open the gun and lay it down gently,all the time yelling,
"It's a $1000 gun,I'm not dropping it OR sliding it to you"

Originally Posted by Chipperxd

wow that is a great looking gun PlayboyPenguin!

and thanks again for all the input! I can only dream of dropping a grand on gun so I guess I better look at some cheaper alternatives. one day...

Get yourself a S&W 686. You can get a 6 or 7 shot.

I have an early production 6" nickel Python. Had the Colt shop do a #1 factory tune for PPC shooting. Use only .38 specials in it. Single stage trigger.

An unbelievably smooth gun. Second in accuracy only to an early stock 4" S&W M66.

Originally Posted by Thumper

I have an early production 6" nickel Python. Had the Colt shop do a #1 factory tune for PPC shooting. Use only .38 specials in it. Single stage trigger.

An unbelievably smooth gun. Second in accuracy only to an early stock 4" S&W M66.

You mean like this one...

Yep. Single most accurate handgun I have ever owned. Many one-hole groups at 50 feet.