Thread: WTS HK AK SKS hook nylon 2 pt "tactical" slings. OD/Black/Coyote

Greetings: Thought I would clean up my previous threads and just post one.... I still have these in all colors and models.


I have three sling styles for sale. All are available in Black, OD or Coyote. All are 70" long. All are made from 1.25" mil-spec nylon webbing with 4500 pound breaking strength with a thickness of .065. All use US Military...US STEEL Triglides.

*M-16 Super Silent -
An improvement on the Government's 48" original, mine are 70" and in colors. Fits any system with 1.25" swivels

COST:3 pack (mix and match colors) for $25 shippped.



*The HK hook - (NOT FACTORY HK - but decent - the same one the rest of the big boy sling makers use) Webbing is doubled looped through and box stitched. In order for failure of this sling it would have to wear through 2 layers. The hooks are box stitched using #69 bonded nylon thread. Will fit multiple weapons with hard attachment points (AK/SKS/HK etc etc. You could even use it as a one point if that is your fancy.

Cost: $20.00 each SHIPPED



* The MASH hook -

Same strong construction as the HK but with a stronger hook. Here is what the manufacturer says about them:

ITW MASH Hook - The MASH (Metal All-purpose Snap Hook) gateless snap hook offers an alternative to the HK-style snap hooks in common use for sling systems. The MASH is constructed from stainless steel. Pressing on the thumb tabs in the middle separates the two rings, allowing the MASH to be slipped into any loop attach point. It's simple to use and more secure than the HK-style.

300 Stainless Steel
Black Oxide Finish
12 lbs. force to open hook
200 lbs. load ratting
No “hook” to get snagged
Low profile
Oversized thumb tabs
Easy operation

No springs or pins to break

It wont rust or break. It is a pretty darn impressive piece of hardware.

Cost: $20.00 each SHIPPED


Also the Three points:

3 point tactical slings in 1.25" nylon mil spec web. They have an HK style hook for the front attachment. If you need a second hook for the rear (SIG rifles with hook holes in stock instead of a loop for webbing) let me know (add $5). Hook can also be removed if you have a front side mounted swivel (see pic of AR).

With the exception of the hook (which is steel), all hardware is acetal, including the fastex emergency release buckle. Will fit any rifle with side mounted sling attachments.

Price is $22.50 DELIVERED via padded envelope. I can do paypal (add $1) or snail mail. Many thanks for looking.

Good looking slings

How much?

I am going to pull out a few of my SKS/AK rifles and see if they have the mounting point needed for your slings to work,if so i will be placing an order.

They do. I have not met an AK or SKS that doesnt.


I also make this one with the MASH hook. It is one piece of blackened stainless steel (no rust) hardware. Works VERY well.

Originally Posted by Deavis

They do. I have not met an AK or SKS that doesnt.

That may be,if they were still in stock configuration
Not much of a military weapon person,so they sit in the safe without getting used very much.
I do know my "SKS M"doesn't have the front mounting point,don't think the "D" does either,the AK's should,will have to check the others.

PM sent

Do you have a website for these? Either way, I'm interested.

Working on the web but not yet. Do you have questions I can answer?

I also am interested. How do they attach to the stock of the gun? Any pics of the full sling attached to an AK? I am looking at putting it on my FS2000. Do you know if it will work for the FS2000? Thanks

Thanks for the interest. The webbing goes from the attachment point you see in the photo to the rear od the stock where it loops through the stock swivel and back to the triglide (metal slide) pictured, just like a standard sling. The web is 1.25" most AK stocks have 1.36" swivels. The AR /MAGPUL/M1A etc is 1.25. I also have a few in 1.5" webbing in various colors. The webbing is 70" long which gives you plenty of adjustment for cross body carry/scramble position or standard slinging. They also cinch up tight enough to stack in your gunsafe and not create a spiderweb when trying to untangle long guns from each other trying to get them out.


I dont know about the FS2000 - what kind of front attachment point they have. It looks like that slot in the stock is about 1.25. If it has a hook or ring on the front this will probably work for you.

PM Sent.

This is what the other end of this HK or MASH Sling would look like attached to a stock with 1.25" swivels. I also make the same sling for ARs/M1A/Fal etc 70" long your choice of colors 3/$25 shipped in the US.

Web belt, now there's something I'd like to see. Nothing too fancy. Just tough nylon, well sewn and a solid metal clip or ring buckle. I'm thinking this would work on defense shotguns that use those stabilizing brackets to hold the tube to the barrel. They usually have the sling slot over on the side as opposed to under the tube.

Originally Posted by Deavis

Wow, that's a killer lookin gun. I wonder how accurate it'd be.

One hole 5 shot groups at 25 yards - but by the time it gets to 100 3 moa is about the norm. Of course I have a 3 moa dot so.... I usually cant shoot them better than the dot size.

I think I'm going to have to build one of those someday, if they're not banned first.

easiest way to go is get a pistol kit, buy a stripped lower registered as a pistol then get $200 tax stamp and add stock.

pm sent

Im thinking I could grab one for my PTR91, do you have a full picture of the design?